Parts & Accessories
- Rigid 6061-aluminum body with 9mm skewer
Hollywood's Single Bike Parking Stand is easy to assemble and simple to use. Roll your bike’s rear wheel into the stand and the bike is now fully supported. It fits most tire sizes including 29’rs and cruisers. - Max tire width: 2.5 inches - Powder-coated steel tubing - Assembles easily in just minutes - Features adjustable legs for uneven floors
Hollywood's Sport Rider SE2 2-Bike Add-on Kit lets you carry an additional 2 bikes on your next adventure. It connects easily by sliding the add-on kit into the base unit (sold separately), inserting the attachment pin & clip, then tightening the lever. - Weight: 45 lbs - Capacity: 2 bikes, max 45 lbs per bike - Fits models HR1450, HR145R, and HRT220 - Space between bikes: 10 inches - Not to be used on any trailer, fifth wheel, or towed vehicle
The locking threaded hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes
Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
$59.95 - $74.95
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
Need more room with your Kuat Vagabond X? Kuat's Xtender adds 21-inches to your basket, and comes with load bars for even more mounting options. Now you don't have to choose what gear makes the cut for your next outdoor adventure. Features • Comes with 2 load bars • Adds 21" to your Vagabond X (sold separately) • 160 lb total load capacity • Makes Vagabond X 41" x 73" x 7" • Load bars measure 44"
The Swiss Army of truck racks is now even better. Redesigned to save previous real estate in truck beds, the DriveShaft Track is better than ever before. 12mm, 15mm, 20mm thru-axle bike rack carrier for truck bed channels found in Toyota, Chevy, GMC, and Nissan. RockyMounts DriveShaft is the first on the market with the ability to carry 12/15/20mm thru-axles and to securely lock your bike. The mouth opens wide for easy loading and the cam lever adjusts like a quick release for a strong hold. Snap-in nylon shims prevent the axle from being unscrewed and allows you to switch between 12mm, 15mm, and 20mm loads.
Kuat's lock comes with a burlap bag, dust cap, two keys, and a Küat keychain bottle opener. 3/8" pin is for their 1.25" racks and the 1/2" pin is for their 2" racks.
Patented adapter design allows you to carry 15mm front suspension forks on existing Thule and most other fork-mounted bike carriers. - Patented adapter design allows use of current bike carrier - Durable materials and construction for added stability - Designed and manufactured in the USA - Welded steel body
- Easy to load 2-Bike rack fits either 1 1/4" or 2" receiver hitch - Fits a wide variety of bicycle sizes and styles up to 35 lbs per bike - Tilts back for easy lift gate access - Folds for easy on or off car storage when not in use - Durable powder coated finish - Hitch Size/Mount: 1-1/4" - 2" - Capacity: 2 bikes
Set of heavy duty wheel holders for Fat tire E-bikes and regular fat bikes for tires up to 5" wide
The Sport Rider Trike Adapter fits most recumbent trikes (NOT suitable for adult/industrial style trikes). Track width up to 32" with standard Sport Rider wheel holders, or 36" track width using extra wide Sport Rider wheel holders.
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
Saris' Spare Tire Plate is for use with their spare tire racks. Grab the Spare as an extra or replacement part.
Allen's Adapter Bar allows full suspension bikes and non-conventional frames to be used on your Allen rack. An internal spring mechanism maintains constant tension to keep your frame secure. Plus, the plastic coating protects your bicycle's finish.
This add-on to Thule's T2 Classic platform hitch rack allows 4 bike capacity (2"/50mm recievers only). - Secure bikes quickly without frame contact with the frame-free ratcheting arm - Bike-to-bike interference is eliminated with fully adjustable bike mounts - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters
The 1-1/4" locking hitch pin comes and 8’ security cable allows you to lock the rack to vehicle, and the cable allows you to locks bikes to rack and/or vehicle.
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key
The new Hollywood Racks Truck Pad is designed to carry up to four bikes in the back of a pickup truck. At 53 inches, it will cover the tailgate of a compact truck and other larger pickups.
$18.95 - $44.95
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
$19.00 - $29.00
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Delta's pre-aligned positioning bike hitch allows for easy fork installation. It features special anti-rust treatment with a tough powder-coat finish. This ultra-rigid 9mm skewer allows you to easily carry your front wheel with a Delta Wheel Hitch or Wheel Holder (each sold separately). - Pre-aligned positioning for easier fork installation - Special anti-rust treatment with tough powder-coat finish - Features patented Delta locking lever - Base Dimensions 4" x 1.5" x 1.75" - Mounting Holes 3" center to center - Ultra-rigid 9mm skewer - Carry your front wheel with a Delta Wheel Hitch (sold separately)
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Spider cargo net that works with the Kuat cargo racks. This includes the Vagabond and Vagabond X.
The mount fits 1.25 round tubing, and fits front wheels 100mm O.L.D. (Over-Locknut-Dimension)
The RockyMounts LoBall Track is a hardcore bike rack solution for channel systems commonly found in Toyota, Nissan, Chevy, and GMC truck beds. It includes locking quick release, lock core, and two keys.
Thru-axle adapter for the Kuat TRIO rack.
An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes
Thule's Accessory Strap Kit is a set of four rubberized, replaceable, ladder-style straps for use with many of Thule's bike racks and anti-sway cradles.
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts.
The Trike Adapter 3 can be used on any Sport Rider SE model. It is an adapter that allows users to carry one trike and one bike. When used with base model HR1450Y-E or HR1455Y-E it allows users to carry 1 electric trike (up to 100 lbs) and 1 electric bike (up to 80 lbs).
Creating the world's most aerodynamic and colorful bike racks since 1993, we've leveraged our knowledge of the bike rack industry and it's ever changing technologies to create the world's most versatile and elegant platform hitch rack. Perfect for the bike enthusiast or recreational rider, the SplitRail Single Add On pairs with the 2" SplitRail to accommodate 3 or 4 bikes. Each add on is engineered with 4" of side-to-side adjustment, which makes fitting anything from kids to adult bikes simple and easy. An integrated cable lock secures bike to rack (lock core and keys included). 40lb max weight per bike with add on(s). 3-bike configuration: 12" spacing (on center) between bikes. 4-Bike configuration: 12" spacing (on center) between bikes one and two; 9" spacing (on center) between bikes two, three, and four. RockyMounts stands by its products by offering a lifetime warranty. - Compatible with 2" SplitRail (SKU 1140, sold separately) to expand carrying capacity to 3 bikes (requires oneAdd On) or 4 bikes (requires two Add Ons) - Lightweight chromoly and aluminum construction - Fits bikes with 20-29" wheels and "Plus" size tires. 48" max wheelbase - 4" of side-to-side tray adjustment for simple and easy loading and unloading of bicycles - Integrated cable lock secures bike to rack - Due to weight restrictions of 1.25" hitches, the SplitRail Single Add on can only be used with the 2" SplitRail - SplitRail rated 5 out of 5 stars on MTBR (August 2016) - RockyMounts offers a lifetime warranty on all of our products - Want to match keys to your existing SplitRail or any other RockyMounts products? Simply add your key number (ex. E144) in the "comments" field at checkout
Secure your through-axle-equipped bike to your fork mount bike rack (sold separately) with RockyMounts' DriveShaft. This adapter allows you to quickly and easily mount a bike with a 15mm or 20mm through-axle fork to your quick-release fork mount rack. It also comes with a lock for peace of mind.
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
Want to load up a big tire bike on your Kuat NV? You'll need the Strap Extender. It adds some length to the rear tire ratchet strap to keep big tires held down tight.
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.
For transporting or storing your bike, Hollywood's Fork Block is the accessory you need. With a stout 9mm-diameter skewer that firmly grips your fork and a heavy-duty base that bolts to any solid surface, you can have a rack anywhere you need one.
Some of the best ideas are home grown in Colorado, and The Fattie is one of them. Easily convert your BrassKnuckles rack to fit your fat bike–the kit includes a larger wheel chock and 2 ratchet strap extenders.
The RockyMounts LoBall is a ridiculously easy bike rack solution for trucks, trailers, vans, SUV's, and home storage. It includes a non-locking, 9mm chromoly quick release.
The Thule Canyon roof basket gives you additional storage space while still allowing gear to be easily accessible. With its robust, tubular-steel design, it is ideal for hauling gear of all shapes and sizes. - Wedge-shaped, low-profile design combines style and function with tapered side walls making it easier to load and unload - Wind fairing is included to help air flow over your cargo - Fits a broad range of vehicles with versatile mounting hardware, and includes t-track mounting for Thule AeroBlade and Thule Xsporter bars - Basket Extension (sold separately) extends the cargo area by 20" - Mounts to all Thule rack systems, round bars and most factory racks - Secures to roof with Thule One Key locks (sold separately) - Height (in): 6 in - Length (in): 50.25 in - Width (in): 41 in - Weight (lb): 29 lb - Load capacity: 150 lb - Maximum barspread: 37 in - Minimum barspread: 20 in
- Powdercoated steel body with 9mm skewer & hole in handle for padlock
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Page 1 of 2 Next page